中文English
Automotive Stamped Part

Auto Reinforcement Superior Part, Material: JSC440P Thickness: 1.6mm
RT50 SEAT PANEL CS, 1.4mm SPFC440 Die shots: 300000
1) Product material:  T=1.6mm JSH270C; 2) Forming type: Punching 3) Total 4 die…
Higrade is a precision auto parts manufacturer in China. With about 10…
Excellent manufacturer for automobile stamping dies and automobile stamping parts. Our products…
Automobile back plate stamping die manufacturer--Higrade. 10 years' rich experience since 2003,…
Auto stamping mould with three steps, forming, blanking, piercing. Mold material: SKD11, Cr12mov.…
Complex auto stamping part, drawing, flanging, piercing etc. Mold steel: SKD11, Cr12mov.…
Auto Lock parts, progressive die stamped, 0.7mm SPCC. Bending angle 90 degree+/-0.1mm.…
<< Start < Prev 1 2 Next > End >>
Page 1 of 2
You are here:   HomeProductsAutomotive Stamped Part

PLASTIC MOULDS IN HIGRADE

| + - | RTL - LTR